Small Gallery Wall Hanging Kit. Hook, Pin, D-rings, Screws, Cord. All you need to hang a small to medium picture frame. Silver/chrome effect

Fed up of struggling with cheaply made hanging hardware? Looking for something in a silver finish rather than the ubiquitous brass? This is the kit you need. High quality materials of the sort used by professional gallery technicians. Nickle plate finish.

Small Gallery Wall Hanging Kit. All you need to hang a small to medium sized picture frame.

Included in this kit:

No.1 Picture Hook
2 x Hardened Steel Pins (one is a spare, see below)
2 x D-rings
2 x 10mm Screws
1m (39") Low Stretch Cord

2mm(0.8") drill bit (optional extra)

Safe working load is approx 5kg(11lb), this can vary depending on the quality of the wall material.

Best Practice:
The D-rings should be placed approximately 1/3rd of the way down your chosen frame.
Take care to ensure the D-rings are level.
Pilot holes should be pre-drilled in the back of the frame with a 2mm(0.08") drill bit. This may not be required on softwood frames, but is essential on all hardwood frames, and is good practice with all quality gallery hanging.

Picture Hook:
Contemporary polished nickel plate finish
Made from hardened steel to resist bending.
Height: 28mm(1.1")
Width: 8mm(0.3")
Steel Thickness: 0.5mm(0.02")
Made in Italy.

Hardened Steel Pin:
Contemporary polished nickel plate finish
Made from hardened steel to resist bending.
Length: 25mm(1")
Made in Italy.
Every kit is supplied with a spare steel pin that may not be required. However given the number of times I have dropped one of the blasted things down a gap in the floorboards, or otherwise mislaid it, I feel this is well worth it to make your life easier.

D-Rings:
Contemporary polished nickel plate finish
Length: 27mm(1.1")
D diameter: 23mm(0.9")
Strap thickness: 0.6mm(0.02")
Screw hole diameter: 4.4mm(0.17")
Gap between the ends of the D: 0.5mm(0.02")
Made in the UK

Screws:
Zinc plated, pozi drive, pan head, steel woodscrews.
10mm x 3mm / 3/8" x No.4

Cord:
Low-Stretch No.1 cord made from white polyester fibre.
We use polyester cord because it has a lower "stretch" than equivalent nylon cord.
1.5mm(0.06") diameter
Made in the UK

2mm Drill Bit (Optional Extra):
HSS Roll Forged Jobber Drill Bit
Diameter: 2mm(0.8")
Length: 49mm(1.9")
Manufactured to DIN338