Jumping Spider UFO Hide with top Magnet

This handmade 3d printed UFO hide adds a safe space in your spider's enclosure. Your spider will soar in the sky all snug in their very own UFO!
Hide is made out of PLA (Polylactic Acid is a recyclable, natural thermoplastic polyester that is derived from renewable resources such as corn starch or sugar cane. It is nontoxic to animals).
This hide comes with a strong neodymium magnet attached to the top for install to the enclosure. Simply place the hide on the inside of the enclosure, and place the included magnet piece on the outside of the enclosure.

Approximate size choices are:

Small: Approx. 2.25"W = Hide area about 1.5"Wx0.86"H Opening about 3/4"W
Medium: Approx. 2.5"W = Hide area about 1.75"Wx0.90"H Opening about .85"W
Large: Approx. 2.75"W = Hide area about 2"Wx0.95"H Opening about .90"W
X-Large: Approx. 3"W = Hide area about 2.12"Wx1"H Opening about 1"W

Please remember this is a handmade 3D printed item and thus there will be variations in the surface of the item. If you find any rough patches you can simply just sand the hide. Pictures in this listing are for example only.
Comes with two Magnets (one is already attached)

Please message me if you would like to order more then I show available.
**I use REALLY strong magnets and unfortunately with that amount of Pull over time the magnets can sometimes come unglued. If this happens you can use Gorilla brand Gel Super Glue to re-install the magnet. Please let the item cure for at least 72 hours.**