Front Mounting Hidden Insert For Door Pulls/Knobs

– Front Mounting hidden insert for door pulls and knobs. Set of 2 pcs with M8 x50 mm bolt. This metal part is used for the front mounting of door pull handles and knobs from the front side of the door. The back side H-type handles convert to the front mounting handle. This is used for door pull post which has no thread in the post (the back side handle of H type handle B2B )
– You can mount and fix the Door pull from the front side of the door. If you are putting Back to Back H type door pull on the door and want to install both pulls on the front side then you have to use this part
– Inset this part from the front side of the door, insert a bolt with brass component remaining outside of the door put the door handle without threads in the post and tight Allen/ grab screw with the Allen key provided. Use the same method for the bottom side of the pull handle
– You can put one handle from the back side of the door on a through bolt and another handle from the front part, so your H-type handle converts to both sides’ front mounting. One handle on a through bolt from the back side and a second handle from the front side using this hidden insert. Includes: Two invisible fixing inserts, 2 bolts, 2 brass washers, and an Alen key
– Easy Installation: Make a small mark hole with a drill bit, insert a hidden insert, and put a bolt into it with a brass washer put the door handle into the brass washer and tighten it properly, Put handles on it and tighten it with grab screws
– In stock : Ships from Canada within 2 to 3 business days

Front Mounting hidden insert for door pulls and knobs. Set of 2 pcs with M8 x50 mm bolt.
This metal part is used for the front mounting of door pull handles and knobs
from the front side of the door. The back side H-type handles convert to the front mounting handle.
This is used for door pull post which has no thread in the post (the back side handle of H type handle B2B )
You can mount and fix the Door pull from the front side of the door
If you are putting Back to Back H type door pull on the door
and want to install both pulls on the front side then you have to use this part
Inset this part from the front side of the door, insert a bolt with brass
component remaining outside of the door put the door handle without threads in the post and tight Allen/ grab screw
with the Allen key provided. Use the same method for the bottom side of the pull handle
You can put one handle from the back side of the door on a through bolt and another
handle from the front part, so your H-type handle converts to both sides’ front mounting.
One handle on a through bolt from the back side and a second handle from the front side using this hidden insert
Includes: Two invisible fixing inserts, 2 bolts, 2 brass washers, and an Alen key

Bolt size M8 x50 mm
Bolt material Stainless steel 304
Brass washer pull holder, with grab screws