Invisible Pole Dancing Shoe Platform/Toebox Protector for Hella Heels Brand Pro Series – Single Pack * Patent Pending *

Introducing the **Pro Series Invisible Pole Dancing Shoe Platform/Toebox Protector** – designed for serious pole dancers who demand the highest level of protection and performance. If you ride extra hard on the front toe-box/platform area, this is the ultimate solution for maintaining your **HELLA HEELS BRAND** pole dancing shoes.

Our Pro Series features a double-layered, clear and invisible adhesive film that provides unparalleled durability and longevity. This innovative accessory effortlessly adheres to your shoes, offering robust protection in the most vulnerable areas, ensuring your footwear remains pristine even under the toughest conditions.

Not only does the Pro Series shield your shoes from minor scratches and scuffs, but its self-healing properties help maintain the pristine condition of your beloved footwear. With the added layer of protection, you can push your limits and elevate your pole dancing experience without worrying about wear and tear.

+++++ WHAT IS INCLUDED:
• One (1) pair (Left and Right shoe) of the BASE layer protection film
• One (1) pair (Left and Right shoe) of the TOP layer protection film
• One (1) 2oz Spray Bottle
• One (1) mini squeegee
• Instruction Sheet

+++++ IMPORTANT NOTE:
• The Invisible Protection Film is suited for smooth surfaces ONLY. NO textured surfaces & NO suede surfaces.
• One pair of the Invisible Protection Film (Left and Right foot) is for one pair of shoes. DO NOT peel it off and apply it on a different heel after the film is set.
• This is a patent pending product.

+++++ INSTRUCTION:
Step 1: Set up
Add a small amount of liquid soap (about the size of a tear) into the spray bottle and add water to mix.

Step 2: Surface Preparation
The platform/toe box surface must be thoroughly cleaned by using rubbing alcohol to ensure proper adhesion. Apply on new heels for best results.

Step 3: Film Application
Spray the soapy water on the sticky side of the base film (matte finish) and the platform/toe box area generously. This helps to position the film easily, and accurately. Carefully align the center of the film onto the tip of the platform/toe box area and slowly wrap the area along the shape of the heel. You may reposition the film as many times as you like within the first 60 minutes.

Step 4: Squeegeeing
After positioning, a squeegee is used to squeeze out the air bubbles and ensure a smooth, tight fit. Let the base film sit for about 30min.

Step 5: Repeat Film Application
Spray the soapy water on the sticky side of the top film (gloss finish) and carefully align the center of the film onto the tip of the platform/toe box area and on top of the base film. Slowly wrap the area along the shape of the platform. After positioning, squeegee out the air bubbles and ensure a smooth, tight fit.

Step 6: Heat Treatment & Dry Time
Use a hair dryer on low heat or place your heels in the sun to help activate the self-healing properties and ensure proper adhesion. Please allow 24-hours dry time before dancing.

Watch the video tutorial on how to apply on the Polemomdesign website.